|
|
Description:
|
mplsFTNTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFTNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the currently defined FTN entries.
This table allows FEC to NHLFE mappings to be
specified. Each entry in this table defines a rule to
be applied to incoming packets (on interfaces that the
FTN entry is activated on using mplsFTNMapTable) and an
action to be taken on matching packets
(mplsFTNActionPointer).
This table supports 6-tuple matching rules based on one
or more of source address range, destination address
range, source port range, destination port range, IPv4
Protocol field or IPv6 next-header field and the
DiffServ Code Point (DSCP) to be specified.
The action pointer points either to instance of
mplsXCEntry in MPLS-LSR-STD-MIB when the NHLFE is a non-
TE LSP, or to an instance of mplsTunnelEntry in the
MPLS-TE-STD-MIB when the NHLFE is an originating TE
tunnel."
REFERENCE
"J. Postel, Internet Protocol, RFC 791, STD 5, September
1981
Deering, S., and R. Hinden, Internet Protocol, Version
6 (IPv6) Specification, RFC 2460, December 1998
Nichols, K, Blake, S., Baker, F. and D. Black,
Definition of the Differentiated Services Field (DS
Field) in the IPv4 and IPv6 Headers, RFC 2474, December
1998
Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS
Label Switch Router Management Information Base,
RFC 3813
Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS
Traffic Engineering Management Information Base,
RFC 3812"
|
|
|
|
Information:
|
Automatically extracted from IETF RFC 3814.
|
|
iso(1)
mplsFTNEntry(1) 
