|
|
Description:
|
ISO/IEC 24727-6 "Identification cards -- Integrated circuit card programming interfaces -- Part 6: Registration authority procedures for the authentication protocols for interoperability"
|
|
Information:
|
According to ISO/IEC 24727-6, sub-clause 5.3, subsequent OIDs are of the form {iso(1) registration-authority(1) iso24727(24727) part6(6) newprotocol-short-name(new-protocol-number)} .
Clause 5.5.1 and Annex B of ISO/IEC 24767-6 deal with "Authentication Protocol Registration Procedures" while clause 5.6.1 and Annex E deal with "Authentication-protocol-adoption registration procedures."
The content of an OID application is specified in clause 8 and the review of applications is detailed in clause 7.
Clause 8.3 states that the Registration Authority shall maintain two registers to include the following:
- Registered authentication protocol including the registered OID;
- A register of authentication-protocol-adoption including the OID adopted.
"SAI Global" was proposed as the Registration Authority by document ISO/IEC JTC 1/SC 17 N 3519 (dated 24 July 2008) and is subject to approval by JTC 1/SC 17.
|
|
Current Registration Authority
|
|
|
|
Name:
|
SAI Global
|
|
To contact the registration authority, replace "&" by "@" in the email address
|
|
Address:
|
SAI Global Limited
286 Sussex Street (cnr Bathurst Street)
Sydney NSW 2000
GPO Box 5420
Sydney NSW 2001
Australia
|
|
Phone: |
+61 2 8206 6000
|
Fax: |
+61 2 8206 6001
|
|
|
First Registration Authority
|
|
|
|
Name:
|
ISO/IEC 24727-6 Registration Authority
|
|
Address:
|
Standards Australia
Level 10, 20 Bridge Street Sydney NSW 2000,
GPO Box 476 Sydney NSW 2001
Australia
|
|
Phone: |
+61 2 9237 6000
|
Fax: |
+61 2 9237 6020
|
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |