|
|
|
|
Description:
|
stateIndicatorNotification NOTIFICATION
BEHAVIOUR
stateIndicatorNotificationBehaviour BEHAVIOUR
DEFINED AS "This notification is automatically emitted at the end of granularityPeriod, and provides a bitmap showing the condition of the NE during the granularityPeriod. The bit position and their definitions are as follows:
bit-0: exchangeCongestionLevel1: This bit is equal to 1 if during the granularityPeriod the NE experiences congestion level 1.
bit-1: exchangeCongestionLevel2: This bit is equal to 1 if during the granularityPeriod the NE experiences congestion level 2.
bit-2: congestionLevel1Received: This bit is equal to 1 if during the granularityPeriod the NE receives CL1 Indicator from any adjacent exchanges.
bit-3: congestionLevel2Recevied: This bit is set equal to 1 during the granularityPeriod when the NE receivedCL2 indicator from any adjacent exchanges.
bit-4: scrTriggered: This bit is equal to 1 if during the granularityPeriod the administrativeState is unlocked and autoActivated is TRUE for at least one instance of SCR control.
bit-5: accTriggered: This bit is equal to 1 if during the granularityPeriod the administrativeState is unlocked and autoActivated is TRUE for at least one instance of acc control.
bit-6: protectiveControlActive: This bit is equal to 1 if during the granularityPeriod one or more instances of protective controls ( i.e. cancelTo, cancelFrom, skip, acc, scr, cancelRerouted) are present in the NE.
bit-7: expansiveControlActive: This bit is equal to 1 during the granularityPeriod when one or more instances of expansive controls (i.e. tarTo, tarFrom) are present in the NE.
bit-8: destinationControlActive: This bit is equal to 1 during the granularityPeriod when one or more instances of destination controls (i.e. destinationCodeControl functions, adc) are present in the NE.
bit-9: htrDestinationActive: This bit is equal to 1 during the granularityPeriod when one or more instances of htrDestination are present in the NE.
bit-10: circuitEndPointSubgroupAddedOrDeleted: This bit is equal to 1 during the granularityPeriod when a circuit subgroup is added or deleted in the NE.
bit-11: accTransmissionInhibited: This bit is equal to 1 if during the granularityPeriod the administrativeState of accTrigger is set to locked.
bit-12: adcTriggered: This bit is equal to 1 if during the granularityPeriod the administrativeState is unlocked and autoActivated is TRUE for at least one instance of adc control";;
WITH INFORMATION SYNTAX Q823-TM-ASN1Module.StateIndicatorBitMap;
|
|
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
itu-t(0)
