---
oid: "1.3.6.1.4.1.9070.1.2.3.1.5.1.3.3"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 9070 symmNetworkManagement(1) symmSnmpManagement(2) symmTTM(3) products(1) syncserver(5) version(1) gps(3) gpsHealth(3)}"
description: "gpsHealth OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2024-11-13"
---

## OID : `1.3.6.1.4.1.9070.1.2.3.1.5.1.3.3`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 9070 symmNetworkManagement(1) symmSnmpManagement(2) symmTTM(3) products(1) syncserver(5) version(1) gps(3) gpsHealth(3)}
```

### Description

```asn1
gpsHealth OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the GPS′ receiver health status defined as follows:
======================================================
0 = Receiver Down The Hardware Clock can't communicate with the receiver.
1 = Unknown Mode An undefined mode of the GPS receiver.
2 = Acquiring Signal The receiver is attempting to track a GPS signal.
3 = Bad Geometry The geometry of the tracked satellites is unsatisfactory for a position solution.
4 = Propagate Mode A position estimation mode used in highly dynamic environments.
5 = 2d Solution The receiver is able to perform position fixes for latitude and longitude but does not have enough satellites for altitude.
6 = 3d Solution The receiver is now able to perform position fixes for
latitude, longitude and altitude.
7 = Position Hold Position fixes are no longer attempted, and the user entered or surveyed position is used.
8 = Time Valid The receiver has valid timing information from GPS satellites (including current leap second information). This is the final state for all configured GPS modes.
======================================================"
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
