---
oid: "1.3.6.1.4.1.9.9.107.1.2.1.1"
short-description: "cHsrpExtIfEntry OBJECT-TYPE"
last-modified: "2020-03-30"
parent-oid: "1.3.6.1.4.1.9.9.107.1.2.1"
---

## OID: `1.3.6.1.4.1.9.9.107.1.2.1.1`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 9 ciscoMgmt(9) ciscoHsrpExtMIB(107) ciscoHsrpExtMIBObjects(1) cHsrpExtIfBIA(2) cHsrpExtIfTable(1) cHsrpExtIfEntry(1)}
```

### Description

```asn1
cHsrpExtIfEntry OBJECT-TYPE
SYNTAX CHsrpExtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If HSRP entries on this interface must use the BIA (Burned
In Address), there must be an entry for the interface in this
table. Entries of this table are only accessible if HSRP has
been enabled i.e entries can not be created if HSRP is not
enabled. Also, the interfaces should be of IEEE 802 ones
(Ethernet, Token Ring, FDDI,VLAN, LANE, TR-LANE).
Setting cHsrpExtIfRowStatus to active initiates the
entry with default value for cHsrpExtIfUseBIA as FALSE.
The value of cHsrpExtIfRowStatus may be set to destroy
at any time. If the row is not initiated, it is similar to
having cHsrpExtIfUseBIA as FALSE.
Entries may not be created via SNMP without explicitly setting
cHsrpExtIfRowStatus to either 'createAndGo' or 'createAndWait'.
Entries can be created and modified via the management
protocol or by the device's local management interface.
If the row is not active, and a local management interface
command modifies that row, the row may transition to active
state.
A row which is not in active state will timeout after a
configurable period (five minutes by default). This timeout
period can be changed by setting cHsrpConfigTimeout."
INDEX { ifIndex }
```

**Classification:** MIB object for network management

### Child OIDs

- `1.3.6.1.4.1.9.9.107.1.2.1.1.1`: `cHsrpExtIfUseBIA(1)`
- `1.3.6.1.4.1.9.9.107.1.2.1.1.2`: `cHsrpExtIfRowStatus(2)`

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
