---
oid: "1.3.6.1.4.1.9.5.1.7.5.1.7"
short-description: "filterPortBroadcastThresholdFraction OBJECT-TYPE"
last-modified: "2018-01-07"
parent-oid: "1.3.6.1.4.1.9.5.1.7.5.1"
---

## OID: `1.3.6.1.4.1.9.5.1.7.5.1.7`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 9 workgroup(5) ciscoStackMIB(1) filterGrp(7) filterPortTable(5) filterPortEntry(1) filterPortBroadcastThresholdFraction(7)}
```

### Description

```asn1
filterPortBroadcastThresholdFraction OBJECT-TYPE
SYNTAX INTEGER (0..99)
UNITS "one-hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the fraction part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPortBroadcastThreshold indicates the integer
part of the maximum percentage of available
bandwidth allowed for incoming traffic of the
specific traffic types on this port. Either
packets of the specific traffic types are dropped
or the port is put into errdisable state
depending on the value of
filterPortSuppressionViolation on this port if the
percentage of incoming traffic of the specific
traffic type would exceed this limit. The
traffic types that are enabled for this traffic
suppression feature is indicated by
filterPortBroadcastOption.
The maximum percentage for the combination
of this object value and the object value of
filterPortBroadcastThreshold is 100.00 which
indicates traffic of all traffic types should not
be limited.
The ability to suppress traffic in this manner
exists only on certain ports. If it does not exist
on this port, attempts to write a value of this
object other than 100 are rejected.
On platforms where filterPortSuppressionOption
object is not supported, this object only applies
to broadcast suppression."
DEFVAL { 0 }
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
