---
oid: "1.3.6.1.4.1.866.20.1.10.2.1.1.2"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 866 frxSoftware(20) frxConfig(1) fcInterfaces(10) fcfLines(2) fcfLineTable(1) fcfLineEntry(1) fcfLineType(2)}"
description: "fcfLineType OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2018-04-09"
---

## OID : `1.3.6.1.4.1.866.20.1.10.2.1.1.2`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 866 frxSoftware(20) frxConfig(1) fcInterfaces(10) fcfLines(2) fcfLineTable(1) fcfLineEntry(1) fcfLineType(2)}
```

### Description

```asn1
fcfLineType OBJECT-TYPE
SYNTAX INTEGER {
synchroneV28Dte(1),
synchroneV28Dce(2),
asynchroneV28Dte(3),
asynchroneV28Dce(4),
v11Dte(5),
v11Dce(6),
v35Dte(7),
v35Dce(8),
g703(9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object indicates which DTE/DCE
interface characteristics (physical layer) are
used on this serial line interface :
synchronousV28Dte : Synchronous, V28, the
equipment is a DTE,
synchronousV28Dce : Synchronous, V28, the
equipment is a DCE,
asynchronousV28Dte : Asynchronous, V28, the
equipment is a DTE,
asynchronousV28Dce : Asynchronous, V28, the
equipment is a DCE,
v11Dte : Synchronous, V11, the equipment is a
DTE,
v11Dce : Synchronous, V11, the equipment is a
DCE,
v35Dte : Synchronous, V35, the equipment is a
DTE,
v35Dce : Synchronous, V35, the equipment is a
DCE,
g703 : G703.
The selection of this type must be done according
to the hardware characteristics of this serial
line interface.
The default value is 'synchronousV28Dte'."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
