---
oid: "1.3.6.1.4.1.74.2.23.5.2.3.3"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 74 att-mgmt(2) paradyneNMS(23) nms-6700(5) dev(2) devStatus(3) devStatusAlert(3)}"
description: "devStatusAlert OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2017-11-29"
---

## OID : `1.3.6.1.4.1.74.2.23.5.2.3.3`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 74 att-mgmt(2) paradyneNMS(23) nms-6700(5) dev(2) devStatus(3) devStatusAlert(3)}
```

### Description

```asn1
devStatusAlert OBJECT-TYPE
SYNTAX UInteger32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current alerts for the device. The bit position number
starting with 0 and counting from the right (low order) bit
will indicate each active Primary Alert. The Primary Alerts
and their bit positions are defined as follows:
device-fail(0),
config-change-notify(1),
test-mode(2),
disabled(3),
out-of-threshold(4),
facility-alarm(5),
external-alarm(6),
streaming-terminal(7),
access-security(8),
dial-backup-active(9),
dte-alarm(10),
subnormal-speed(11),
primary-channel-interrupt(12),
firmware-downloading(13),
make-busy-mode(14),
service-line(15),
non-answering-modem(16),
short-holding-time-modem(17),
sub-tree-truncation(18),
tdm-failure-good-apl(19),
trib-timeout(20),
dial-tone(21),
redundant-power(22),
no-response(31)"
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
