---
oid: "1.3.6.1.4.1.644.2.4.2.7.1.2.1.10"
short-description: "optT1E1CfgCmdStatus OBJECT-TYPE"
last-modified: "2021-04-02"
parent-oid: "1.3.6.1.4.1.644.2.4.2.7.1.2.1"
---

## OID: `1.3.6.1.4.1.644.2.4.2.7.1.2.1.10`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 644 eriProducts(2) dnx(4) devices(2) dnxStm1Oc3(7) opticalConfig(1) optT1E1LinkConfigTable(2) optT1E1LinkConfigEntry(1) optT1E1CfgCmdStatus(10)}
```

### Description

```asn1
optT1E1CfgCmdStatus OBJECT-TYPE
SYNTAX LinkCmdStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command status for this link configuration row/record.
The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command:
ready-for-command(0)
initial default status for a row optical T1E1 Link Commands used in SET Command (1..199)
update(1)
Change existing Link Configuration
inServiceAll (7)
Change Link Status to in-service for all links within the same payload.
copyToAll (9)
Copy T1/E1 Link configuration to all other links within the same payload
outOfServiceAll (12)
Change Link Status to out-of-service for all links within the same payload.
Response States used in GET RESPONSE Command (100..199):
update-successful (101)
Link data has been successfully changed
insvc-successful (107)
All Payload Links have been successfully placed In Service
copy-successful (109)
Link data has been successfully copied to other links
oos-successful (112)
All Payload Links have been successfully placed Out of Service
optical T1E1 Link Config Error Codes used in GET RESPONSE Command (400..699):
err-general-link-config-error (400)
Unknown link configuration error occurred
err-invalid-link-status (401)
Unrecognized link status setting
err-invalid-link-framing (402)
Line framing type not valid for link type
err-invalid-link-command (403)
Unrecognized link command-action
err-invalid-esf-format (405)
ESF type not applicable to link type
err-invalid-red-timeout (412)
Unrecognized red alarm timeout
err-invalid-idle-code (413)
Unrecognized unused TSs code
err-device-in-standby (414)
Can't change config for designated Standby device
err-data-locked-by-another-user (450)
Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name
err-snmp-parse-failed (500)
Agent could not parse variable
err-invalid-snmp-type (501)
Variable ASN type does not match Agent defined type
err-invalid-snmp-var-size (502)
Variable size is too big"
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
