---
oid: "1.3.6.1.4.1.644.2.4.2.3.1.2.1.12"
short-description: "sts1T1E1CfgCmdStatus OBJECT-TYPE"
last-modified: "2018-01-03"
parent-oid: "1.3.6.1.4.1.644.2.4.2.3.1.2.1"
---

## OID: `1.3.6.1.4.1.644.2.4.2.3.1.2.1.12`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 644 eriProducts(2) dnx(4) devices(2) dnxSTS1(3) sts1Config(1) sts1T1E1LinkConfigTable(2) sts1T1E1LinkConfigEntry(1) sts1T1E1CfgCmdStatus(12)}
```

### Description

```asn1
sts1T1E1CfgCmdStatus OBJECT-TYPE
SYNTAX LinkCmdStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command status for this link configuration row/record.
The value used in a SET will be replaced by a response
value in the GET RESPONSE indicating success or failure.

Default Response State used in GET RESPONSE Command
ready-for-command (0)
initial default status for a row

STS1-T1 Link Commands used in SET Command (1..199)
update(1)
Change existing Link Configuration
inServiceAll (7)
Change Link Status to in-service for all 8 links.
copyToAll (9)
Copy T1 Link configuration to all other links
within the same device
outOfServiceAll (12)
Change Link Status to out-of-service for all 8 links.

Response States used in GET RESPONSE Command (100..199)
update-successful (101)
Link data has been successfully changed
insvc-successful (107)
All Links have been successfully placed In Service
copy-successful (109)
T1 Link data has been successfully copied to other links
oos-successful (112)
All Links have been successfully placed Out of Service

STS1-T1 Link Config Error Codes used in GET RESPONSE Command (400..699)
err-general-link-config-error (400)
Unknown link configuration error occurred
err-invalid-link-status (401)
Unrecognized link status setting
err-invalid-link-framing (402)
Line framing type not valid for link type
err-invalid-link-command (403)
Unrecognized link command-action
err-invalid-esf-format (405)
ESF type not applicable to link type
err-invalid-link-density (406)
Unrecognized T1 link density setting
err-invalid-network-loop (410)
Unrecognized network loop setting
err-invalid-yellow-alrm (411)
Unrecognized yellow alarm setting
err-invalid-red-timeout (412)
Unrecognized red alarm timeout
err-invalid-idle-code (413)
Unrecognized idle code
err-device-in-standby (414)
Can't change config for designated Standby device
err-data-locked-by-another-user (450)
Another administrative user is making changes to this
part of the system via a terminal session. Check Event
Log for user name
err-snmp-parse-failed (500)
Agent could not parse variable
err-invalid-snmp-type (501)
Variable ASN type does not match Agent defined type
err-invalid-snmp-var-size (502)
Variable size is too big"
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
