---
oid: "1.3.6.1.4.1.644.2.4.1.12.2.2.1.13"
short-description: "apsSwitchCmdStatus OBJECT-TYPE"
last-modified: "2018-01-03"
parent-oid: "1.3.6.1.4.1.644.2.4.1.12.2.2.1"
---

## OID: `1.3.6.1.4.1.644.2.4.1.12.2.2.1.13`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 644 eriProducts(2) dnx(4) sysMgr(1) utilities(12) dnxAPS(2) apsStatusTable(2) apsStatusEntry(1) apsSwitchCmdStatus(13)}
```

### Description

```asn1
apsSwitchCmdStatus OBJECT-TYPE
SYNTAX INTEGER {
\-- Initial default status for a row
readyForRequest (0),
\-- APS Requests used in SET Command (1..99)
manualSwitchReq (8),
forceSwitchReq (14),
clearRequest (31),

\-- Response States used in GET RESPONSE Command (100..199)
manual-successful (108),
force-successful (114),
clear-successful (131),

\-- APS Request Error Codes used in GET RESPONSE Command (400..799)
err-gen-aps-req-error (400),
err-invalid-aps-card-type (402),
err-field-cannot-be-set (406),
err-invalid-aps-command (408),
err-snmp-parse-failed(500),
err-invalid-snmp-type(501),
err-invalid-snmp-var-size(502)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the command/status value for the APS Status Row.
The value used in a SET will be replaced by a response
value in the GET RESPONSE indicating success or failure.
These commands can only be SET in the Working APS Device.
Default Response State used in GET RESPONSE Command
readyForRequest (0)
initial default status for a row

APS Requests used in SET Command (1..99)
manualSwitchReq (8)
Manually Switches the specified working device
to the protection device.
forceSwitchReq (14)
Switches the specified working device to the
protection device.
clearRequest (31)
Clears all of the switch commands for the
specified APS device.

Response States used in GET RESPONSE Command (100..199)
manual-successful (108)
Manual Switch command has been successfully
processed
force-successful (114)
Forced Switch command has been successfully
processed
clear-successful (131)
Switch commands been successfully cleared

Error Codes used in GET RESPONSE Command (400..799)
err-gen-aps-req-error (400)
Unknown APS request error occurred
err-invalid-aps-card-type (402)
Requests cannot be processed by the protection card
err-field-cannot-be-set (406)
Read-only field was included in SET request
err-invalid-aps-command (408)
Invalid APS request
err-snmp-parse-failed (500)
Agent could not parse variable
err-invalid-snmp-type (501)
Variable ASN type does not match Agent defined type
err-invalid-snmp-var-size (502)
Variable size is too big"
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.