---
oid: "1.3.6.1.4.1.562.36.2.1.60.106.1.1"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 562 msCarrier(36) mscPassport(2) mscComponents(1) mscTrk(60) mscTrkTransportTable(106) mscTrkTransportEntry(1) mscTrkMeasuredSpeedToIf(1)}"
description: "mscTrkMeasuredSpeedToIf OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2017-12-20"
---

## OID : `1.3.6.1.4.1.562.36.2.1.60.106.1.1`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 562 msCarrier(36) mscPassport(2) mscComponents(1) mscTrk(60) mscTrkTransportTable(106) mscTrkTransportEntry(1) mscTrkMeasuredSpeedToIf(1)}
```

### Description

```asn1
mscTrkMeasuredSpeedToIf OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the current 'transmittable' bandwidth of the
underlying facility.
For a Trunk with a Unack subcomponent, and a DpnGateway with a
Utp subcomponent, if a serial port is used, the value is the measured
transmit speed of the port; if a channelized port (E1/DS1) is used,
the value is the measured transmit speed of the Channel.
For a Trunk with an AtmAccess subcomponent, the value is
calculated by converting the VCC transmit cell rate to an equivalent
bit rate. The VCC transmit cell rate is determined based on the
vccReportingBw attribute of the Trunk AtmAccess component. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of no, the peak cell rate (PCR) of the VCC,
defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If
vccReportingBw has a value of pcr and attribute bwElastic of
AtmAccess has a value of yes, the minimum of the PCR, defined in
txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate
(CCR) of the VCC is used. If vccReportingBw has a value of acr,
the best measurement of the actual cell rate (ACR) of the VCC is
used, which is the minimum of the PCR, the CCR and the actual
shaping rate (ASR).
For a DpnGateway with a FrAccess subcomponent, the value
indicates the committedInformationRate of FrAccess FrMuxSetup.
A value of zero is displayed when the underlying facility is disabled
or the current 'transmittable' bandwidth is unknown."
DEFVAL { 0 }
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
