---
oid: "1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.2"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 562 magellan(2) passport(4) components(1) lp(12) lpDS3(5) lpDS3Test(2) lpDS3TestSetupTable(11) lpDS3TestSetupEntry(1) lpDS3TestType(2)}"
description: "lpDS3TestType OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2017-12-20"
---

## OID : `1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.2`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 562 magellan(2) passport(4) components(1) lp(12) lpDS3(5) lpDS3Test(2) lpDS3TestSetupTable(11) lpDS3TestSetupEntry(1) lpDS3TestType(2)}
```

### Description

```asn1
lpDS3TestType OBJECT-TYPE
SYNTAX INTEGER {
card(0),
manual(1),
localLoop(2),
remoteLoop(3),
externalLoop(4),
payloadLoop(5),
remoteLoopThisTrib(6),
v54RemoteLoop(7),
pn127RemoteLoop(8) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors."
DEFVAL { card }
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
