---
oid: "1.3.6.1.4.1.562.2.4.1.110.10.12.1.2"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 562 magellan(2) passport(4) components(1) appn(110) appnLocTg(10) appnLocTgTgCharTable(12) appnLocTgTgCharEntry(1) appnLocTgConnectCost(2)}"
description: "appnLocTgConnectCost OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2017-12-20"
---

## OID : `1.3.6.1.4.1.562.2.4.1.110.10.12.1.2`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 562 magellan(2) passport(4) components(1) appn(110) appnLocTg(10) appnLocTgTgCharTable(12) appnLocTgTgCharEntry(1) appnLocTgConnectCost(2)}
```

### Description

```asn1
appnLocTgConnectCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost-per-connect time is a characteristic represented by a
single-byte value in the range 0 to 255 that expresses a relative cost
of using a transmission group. The units for cost-per-connect time
are installation-defined and are typically based on the applicable
tariffs of the transmission facility being used by the transmission
group. The cost-per-connect time values that a network
administrator assigns to the transmission groups in a network
should reflect the relative expense of each transmission group as
compared to all other transmission groups in the network. A value
of 0 means that the cost of connecting over the transmission group
is at no additional cost (as in the case of a non-switched facility."
DEFVAL { 0 }
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
