---
oid: "1.3.6.1.4.1.5504.2.5.42.1.11.1.3"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 5504 zhoneProduct(2) zhoneWtn(5) zhnLayer2Bridging(42) layer2BridgingObjects(1) availableInterfaceTable(11) availableInterfaceEntry(1) interfaceReference(3)}"
description: "interfaceReference OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2018-12-06"
---

## OID : `1.3.6.1.4.1.5504.2.5.42.1.11.1.3`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 5504 zhoneProduct(2) zhoneWtn(5) zhnLayer2Bridging(42) layer2BridgingObjects(1) availableInterfaceTable(11) availableInterfaceEntry(1) interfaceReference(3)}
```

### Description

```asn1
interfaceReference OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This table should contain a single entry for each available LAN
and WAN interface. For a WAN interface, this parameter is the full
hierarchical parameter name of a particular WANConnectionDevice.
A WANConnectionDevice is considered available (included in this
table) only if it supports layer-2 bridged traffic. That is, this
table MUST include only WANConnectionDevices that contain either
a WANEthernetLinkConfig object, or that contain a WANDSLLinkConfig
object for which the LinkType is EoA (Ethernet over ATM). For example:
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2

For a LAN interface, this parameter is the full hierarchical parameter
name of a particular LAN InterfaceConfig object, or a WLANConfiguration
object. This table SHOULD include one entry for each such object. For
example:
InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2

For a WAN-side connection to the Gateway's IP router, this parameter
is the full hierarchical parameter name of a particular WANConnection
service. This table SHOULD include an entry for each layer-3 WAN
connection. For example:
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.WANPPPConnection.1

For a LAN-side connection to the Gateway's IP router, this parameter
is the full hierarchical parameter name of a particular LANDevice. This
table SHOULD include an entry for each LANDevice, each of which is
associated with a LAN-side layer-3 connection to the Gateway's IP
router. For example:
InternetGatewayDevice.LANDevice.2"
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
