---
oid: "1.3.6.1.4.1.5504.2.5.42.1.10.1.5"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 5504 zhoneProduct(2) zhoneWtn(5) zhnLayer2Bridging(42) layer2BridgingObjects(1) markingTable(10) markingEntry(1) markingInterface(5)}"
description: "markingInterface OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2018-12-06"
---

## OID : `1.3.6.1.4.1.5504.2.5.42.1.10.1.5`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 5504 zhoneProduct(2) zhoneWtn(5) zhnLayer2Bridging(42) layer2BridgingObjects(1) markingTable(10) markingEntry(1) markingInterface(5)}
```

### Description

```asn1
markingInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface or interfaces associated with this Marking table
entry. The bridge corresponding to this Marking table entry is
defined to admit packets on ingress to the bridge from the
specified interfaces that meet all of the criteria specified
in the Marking table entry. The following values are defined.

- To associate this Marking with a single interface
listed in the AvailableInterface table, the Marking
Interface value is set to the value of corresponding
AvailableInterfaceKey.

- AllInterfaces indicates that this Marking is associated
with all LAN and WAN interfaces listed in the AvailableInterface
table (all entries of InterfaceType LANInterface or WANInterface).

- LANInterfaces indicates that this Marking is associated with all
LAN interfaces listed in the AvailableInterface table (all entries
of InterfaceType LANInterface).

- WANInterfaces indicates that this Marking is associated with all
WAN interfaces listed in the AvailableInterface table (all entries
of InterfaceType WANInterface).

- An empty string indicates the Marking table entry is not associated
with any interface (and has no effect).

If there is more than one enabled Marking table entry that specifies
one or more of the same interfaces for the same bridge (i.e. identical
values of MarkingBridgeReference), then for packets on egress from
the specified bridge to those interfaces, the applied marking MUST be
that specified in the Marking table entry among those in conflict
with the lowest MarkingKey value.

If an interface in a given bridge does not have a corresponding
Marking table entry, the marking is left unchanged on egress."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
