---
oid: "1.3.6.1.4.1.45.4.4.1.2.1.1.4"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 45 policy(4) ntnQosPolicyExtPib(4) ntnQosPolicyExtPibClasses(1) ntnQosActionExt(2) ntnQosActionExtTable(1) ntnQosActionExtEntry(1) ntnQosActionExtSetDropPrec(4)}"
description: "ntnQosActionExtSetDropPrec OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2017-12-14"
---

## OID : `1.3.6.1.4.1.45.4.4.1.2.1.1.4`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 45 policy(4) ntnQosPolicyExtPib(4) ntnQosPolicyExtPibClasses(1) ntnQosActionExt(2) ntnQosActionExtTable(1) ntnQosActionExtEntry(1) ntnQosActionExtSetDropPrec(4)}
```

### Description

```asn1
ntnQosActionExtSetDropPrec OBJECT-TYPE
SYNTAX INTEGER {
dropPrec1(1),
dropPrec2(2),
dropPrec3(3),
dropPrec4(4),
dropPrec5(5),
dropPrec6(6),
dropPrec7(7),
dropPrec8(8),
useDefault(9),
ignore(10),
useEgressMap(11)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This action attribute, when specified, will cause
the packet being evaluated to be associated with the
specified relative drop precedence. The relative drop
precedence may be used to determine traffic
precedence relative to other traffic being processed
by the device and other implementation specific
operations at the egress interface.
A low value for drop precedence equates to the traffic
receiving a higher priority in terms of processing.
In other words, traffic with a drop precedence of 1
is treated with the highest processing priority while
traffic with a drop precedence of 8 receives the
lowest processing priority.
Specifying a value equal to useDefault(9) means that
the value for this attribute will be assigned based
on default information maintained in the system. The
value specified in the 'UpdateDSCP' attribute will
be used to determine the default drop precedence. Note
that specifying useDefault(9) means that assignment
of a value for this attribute is implementation
dependent.
Specifying a value equal to ignore(10) means that
no action will be taken related to this attribute.
Note that the results of classification where
actions specifying ignore(10) are applied are
implementation dependent.
Specifying a value equal to useEgressMap(11) means that
the value for this attribute will be assigned based
on DSCP-to-drop precedence egress map information
maintained in the system. The DSCP value in received
traffic will be used to determine the drop precedence.
Note that specifying useEgressMap(11) means that assignment
of a value for this attribute is implementation
dependent."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
