---
oid: "1.3.6.1.4.1.4413.2.99.1.1.2.2.1.14"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4413 cableData(2) cableDataPrivate(99) cableDataPrivateMIB(1) cableDataPrivateMIBObjects(1) cableDataFactory(2) cablemodemFactory(2) cmFactoryBase(1) cmFactExtendedUsTxPowerCapability(14)}"
description: "cmFactExtendedUsTxPowerCapability OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2023-06-12"
---

## OID : `1.3.6.1.4.1.4413.2.99.1.1.2.2.1.14`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 4413 cableData(2) cableDataPrivate(99) cableDataPrivateMIB(1) cableDataPrivateMIBObjects(1) cableDataFactory(2) cablemodemFactory(2) cmFactoryBase(1) cmFactExtendedUsTxPowerCapability(14)}
```

### Description

```asn1
cmFactExtendedUsTxPowerCapability OBJECT-TYPE
SYNTAX Integer32 (0|205..244)
UNITS "quarter dBmV"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum extended upstream transmit power of which this
device is capable. A value of zero indicates that the device has no
extended upstream power capability. The value specified in this
object will be advertised in TLV 5.40 of the CM's modem capability
message.
This object differs from cmExtendedUsTxPowerCapability from the
BRCM-CM-MGMT-MIB in that the value set to this object will be stored
in both permanent and dynamic nonvol. The permanent setting will
become the new default; if dynamic nonvol is defaulted then it will
adopt the value stored in permanent nonvol.
Note There will be limitations on performance in extended power mode:
1. The same modulation format must be used for all 4 upstream channels.
2. Distortion will increased. It will comply with DOCSIS requirements,
but will no longer comply with the extended Comcast specifications
for downstream spurious signals from 54 to 88 MHz.
3. Extended power will be increased for 64-QAM and 16-QAM formats
ONLY.
4. Power enhancement will only be achievable on North American
low-split systems (42 MHz upper limit)."
REFERENCE
"Data-Over-Cable Service Interface Specifications DOCSIS 3.0 MAC and
Upper Layer Protocols Interface Specification
CM-SP-MULPIv3.0-I15-110210 section 6.4.28.1.15"
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
