---
oid: "1.3.6.1.4.1.353.5.10.1.1.3.1.4"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 353 atmForumNetworkManagement(5) atmfLoopEmulationService(10) cpIwfMIB(1) cpIwfMIBObjects(1) cpIwfPotsPortTable(3) cpIwfPotsPortEntry(1) potsPortTestType(4)}"
description: "potsPortTestType OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2018-10-29"
---

## OID : `1.3.6.1.4.1.353.5.10.1.1.3.1.4`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 353 atmForumNetworkManagement(5) atmfLoopEmulationService(10) cpIwfMIB(1) cpIwfMIBObjects(1) cpIwfPotsPortTable(3) cpIwfPotsPortEntry(1) potsPortTestType(4)}
```

### Description

```asn1
potsPortTestType OBJECT-TYPE
SYNTAX INTEGER {
none (1),
codecLoopback (2),
aal2Loopback (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the type of test to run for
POTS ports. There are no results stored locally for a loopback
test. The tests involve looping back the media stream at either
the codec (PCM loopback) or the AAL2 layer (CPS loopback).
In order to run these tests, the CO-IWF must first set the value of
this object appropriate to the test that needs to be run. The CO-IWF
should then set the value of ifAdminStatus in the corresponding
ifEntry to 'testing'.
The CO-IWF should verify that the test is in progress by checking
that the value of ifOperStatus in the corresponding ifEntry is
equal to 'testing'. Once testing is complete the CO-IWF must set
the ifAdminStatus to a value other than 'testing'.
Note that the LES device must not allow a CO-IWF to manipulate
the ifAdminStatus of physical user ports that do not belong to
its managed CP-IWF."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
