--- oid: "1.3.6.1.4.1.351.150.1" asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 351 ciscoWan(150) ciscoWanAtmConnMIB(1)}" description: "ciscoWanAtmConnMIB MODULE-IDENTITY " last-modified: "2020-03-10" tags: [oid-repository] --- ## OID: `1.3.6.1.4.1.351.150.1` (last updated: 2020-03-10) ```asn1 {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 351 ciscoWan(150) ciscoWanAtmConnMIB(1)} ``` ### Description ```asn1 ciscoWanAtmConnMIB MODULE-IDENTITY LAST-UPDATED "200303300000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "This MIB is used for configuring/provisioning SPVCs on the ATM interfaces. This is used for ATM switch connection management. Terminologies used: GCRA - The Generic Cell Rate Algorithm(GCRA) is used to define comformance with repect to the traffic contract.For each cell arrival, the GCRA determines whether the cell conforms to the traffic contract of the connection. PCR - The Peak Cell Rate(PCR) traffic parameter specifies an upper bound on the rate at which traffic can be submitted on an ATM connection. SCR - Sustained Cell Rate. MBS - Maximum Burst Size. MCR - Minimum Cell Rate is the rate at which the source is always allowed to send. ACR - Allowed Cell Rate is the current rate at which a source is allowed to send. RDF - Rate Decrease Factor controls the decrease in the cell transmission rate CRM - Missing RM-cell count. CRM limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells. CDF - The Cutoff Decrease Factor controls the decrease in ACR assoicated with the CRM. CDVT - Cell Delay Transfer Variation Tolerance CBR - The Constant Bit Rate(CBR) service category is used by connections that request a static amount of bandwidth that is continuously available during the connection lifetime. This amount of bandwidth is characterized by a PCR value. rt-VBR - The real-time Variable Bit Rate(rt-VBR) service category is intended for real-time applications, i.e.,those requiring tightly constrainded delay and delay variation, as would be appropriate for voice and video applications.The rt-VBR connections are characterized in terms of a PCR, SCR and MBS. nrt-VBR - The non-real-time Variable Bit Rate(nrt-VBR) service category is intended for non-real-time applications which have bursty traffic characteristics. The nrt-VBR is characterized in terms of a PCR,SCR and MBS. UBR - The Unspecified Bit Rate(UBR) service category is intended for non-real-time applications,i.e.,those not requiring tightly constrained delay and delay variation. The UBR service does not specify traffic related service gurantees. The UBR service is indicated by use of the Best Effort Indicator in ATM User Cell Rate Information element. ABR - The Available Bit Rate(ABR) is an ATM layer service category for which the limiting ATM layer transfer characteristics provided by the network may change subsequent to connection establishment. CAC - The Connection Admission Control(CAC) function is defined as the set of actions taken by the network at SVC establishment or by network management during PVC establishment in order to determine whether a connection can be progressed or should be rejected. UPC - Usage Parameter Control(UPC) is defined as the set of actions taken by the network to monitor and control traffic. " REVISION "200303300000Z" DESCRIPTION "a) MAX-ACCESS clauses of objects in cwAtmChanTestTable are changed from read-create to read-write since this table does not have RowStaus object. " REVISION "200209180000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanP2MP b) The DESCRIPTION of following objects are updated as a result of adding 'cwaChanP2MP' object: 'cwaChanRemoteVpi', 'cwaChanRemoteVci', 'cwaChanRemoteNSAPAddr', 'cwaChanRemotePCR', 'cwaChanRemoteMCR', 'cwaChanRemoteSCR', 'cwaChanRemoteCDV', 'cwaChanRemoteCTD', 'cwaChanRemoteMBS', 'cwaChanRemoteCDVT', 'cwaChanRemotePercentUtil', 'cwaChanRemoteCLR' and 'cwaChanSlaveType' c) Importing Unsigned32 from SNMPv2-SMI. d) Added 'cwGlobalChanDataTable' Table. e) Added following objects in cwAtmChanCnfgTable: cwaChanPrefRouteId cwaChanDirectRoute " REVISION "200203240000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanSlaveType cwaChanRoutingPriority. b) Added following objects under cwAtmChanInformation: cwaChanNumVPCsInAlarm cwaChanNumVCCsInAlarm. c) Clarified the ifIndex usage in DESCRIPTION of cwAtmChanCnfgEntry. d) Updated the DESCRIPTION of following objects: cwaChanServiceCategory cwaChanVpcFlag cwaChanIdentifier cwaChanRowStatus e) Modified the range from 0..100 to 1..100 for following objects: cwaChanPercentUtil cwaChanRemotePercentUtil. f) Deprecated following objects: cwaChanAbrERS cwaChanAisIWCapability " REVISION "200102090000Z" DESCRIPTION "Update description for cwaChanVpcFlag, cwaChanStatsEnable, cwaChanRoutingMastership, and cwaChanAbrVSVDEnable" REVISION "200101030000Z" DESCRIPTION "Change description to indicate that cwaChanCDV, cwaChanCTD, cwaChanRemoteCDV, cwaChanRemoteCTD and cwaChanMaxCost parameters cannot be set on a slave endpoint." REVISION "200011150000Z" DESCRIPTION "Added cwaChanOamSegEpEnable object in cwAtmChanCnfgTable." REVISION "200007170000Z" DESCRIPTION "Deprecated object cwaChanRemoteCDVT" REVISION "200006190000Z" DESCRIPTION "Initial version of the MIB" **Classification**: MIB object for network management; Module in a given formal language ### Child OIDs - `1.3.6.1.4.1.351.150.1.1`: `cwConnMibObjects(1)` - `1.3.6.1.4.1.351.150.1.2`: `ciscoWanAtmConnMIBConformance(2)` ### Terms of Use [Terms of use](https://oid-base.com/disclaimer.htm.md) **Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.