---
oid: "1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.8"
short-description: "swPortCtrlPriority OBJECT-TYPE"
last-modified: "2025-10-29"
parent-oid: "1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1"
---

## OID: `1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.8`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 326 systems(2) external(20) dlink(1) golf(2) golfcommon(2) marconi-mgmt(2) es1300Series(26) swPortPackage(3) swPortCtrlTable(2) swPortCtrlEntry(1) swPortCtrlPriority(8)}
```

### Description

```asn1
swPortCtrlPriority OBJECT-TYPE
SYNTAX INTEGER {other(1), not-override-low-priority(2), not-override-high-priority(3), override-low-priority(4), override-high-priority(5)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority queueing for packets received on this port, except for
BPDU/IGMP packets and packets with unknown unicast destination address.
IGMP and BPDU packets are always routed with high priority; packets with
unknown unicast destination addresses are always routed with low priority.
Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
not_override-low_priority(2) - A packet is normally classified as low priority
,unless at least one of the following is true:
.The packet contained a TAG (per 802.1Q definition) with the
priority greater or equal to 4.
.The address-table entry for the destination address had Pd=HIGH.
.The address-table entry for the source address had Pd=HIGH.
not_override-high_priority(3) - A packet is normally classified as high
priority.
override-low_priority(4) - A packet is normally classified as low priority.
override-high_priority(5) - A packet is normally classified as high
priority."
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
