---
oid: "1.3.6.1.4.1.2604.6.1.43.99.4.7.1.4.4.1.2"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2604 switch(6) profileA(1) swCS110-48P(43) temporarily(99) privateQBridgeMIB(4) pmQBridgeMIB(7) pmQBridgeMIBObjects(1) pmDot1qVlan(4) pmDot1qVlanStaticTable(4) pmDot1qVlanStaticEntry(1) pmDot1qVlanStaticRowStatus(2)}"
description: "pmDot1qVlanStaticRowStatus OBJECT-TYPE"
last-modified: "2023-04-13"
tags: [oid-repository]
---

## OID: `1.3.6.1.4.1.2604.6.1.43.99.4.7.1.4.4.1.2`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2604 switch(6) profileA(1) swCS110-48P(43) temporarily(99) privateQBridgeMIB(4) pmQBridgeMIB(7) pmQBridgeMIBObjects(1) pmDot1qVlan(4) pmDot1qVlanStaticTable(4) pmDot1qVlanStaticEntry(1) pmDot1qVlanStaticRowStatus(2)}
```

### Description

```asn1
pmDot1qVlanStaticRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to set/indicate the status of the
static vlan entry. Setting the status as NOT_IN_SERVICE stops
the data flow for this Vlan.
This table will only create/delete a Vlan. To set the member ports
for the Vlan configure the table - fsDot1qVlanStaticPortConfigTable.
To create a new VLAN and assign member ports to it set the rowstatus
object in this table as 'CREATE_AND_WAIT', set the appropriate port
in the fsDot1qVlanStaticPortConfigTable and finally set the rowstatus
in this table as 'ACTIVE'.
To update the member ports of an existing Vlan
- EITHER set the rowstatus object in this table as
'NOT_IN_SERVICE', add/delete the appropriate ports in the
fsDot1qVlanStaticPortConfigTable and finally 'apply' the
changes by setting the rowstatus in this table as 'ACTIVE'.
- OR directly add/delete the ports in the
fsDot1qVlanStaticPortConfigTable on the fly without changing
the Vlan status."

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)