---
oid: "1.3.6.1.4.1.24062.2.3.9.3.1.1.1.4"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 24062 products(2) managedPOESwitch(3) jetnet5310G(9) portConfiguration(3) portControl(1) portCtrlTable(1) portCtrlEntry(1) portCtrlSpeedAndDuplex(4)}"
description: "portCtrlSpeedAndDuplex OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2024-09-13"
---

## OID : `1.3.6.1.4.1.24062.2.3.9.3.1.1.1.4`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 24062 products(2) managedPOESwitch(3) jetnet5310G(9) portConfiguration(3) portControl(1) portCtrlTable(1) portCtrlEntry(1) portCtrlSpeedAndDuplex(4)}
```

### Description

```asn1
portCtrlSpeedAndDuplex OBJECT-TYPE
SYNTAX INTEGER {autoNegotiation(1), tenMbpsHalfDuplex(2), tenMbpsFullDuplex(3), hundredMbpsHalfDuplex(4), hundredMbpsFullDuplex(5), thousandMbpsFullDuplex(6)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speed and duplex configuraion.
Different speed and duplex modes are available. There are speeds:
1000 megabits per second (Gigabit Ethernet), 100 megabits per
second (Fast Ethernet), and 10 megabits per second (Legacy
Ethernet).
Full-duplex allows packets to be transmitted in both directions
at the same time, while half-duplex allows a device to either
transmit or receive, but not both at the same time. Full-duplex
may have double bandwidth than half-duplex.
You can configure manually from the possible options, listed from
best to worst:
1Gb full-duplex(6)
100Mb full-duplex(5)
100Mb half-duplex(4)
10Mb full-duplex(3)
10Mb half-duplex(2)
Set to autoNegotiation(1) to allow the two interfaces on the link
to exchange the capabilities and characteristics of the each side,
and select the best operating mode automatically when a cable is
plugged in."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
