---
oid: "1.3.6.1.4.1.23.2.28.10.2.1.10"
short-description: "nwSetParamMode OBJECT-TYPE"
last-modified: "2004-10-31"
parent-oid: "1.3.6.1.4.1.23.2.28.10.2.1"
---

## OID: `1.3.6.1.4.1.23.2.28.10.2.1.10`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 23 mibDoc(2) nwServer(28) nwSetParams(10) nwSetParamTable(2) nwSetParamEntry(1) nwSetParamMode(10)}
```

### Description

```asn1
nwSetParamMode OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A value defining how and when the command takes
effect.
The value is a sum. This value initially takes the
value zero, then for each place the parameter can be
set from, 2 raised to a power is added to the sum. The
powers are according to the following table:
Set From Power
Console 0
AUTOEXEC.NCF 1
STARTUP.NCF 2
For example, a parameter that can be set from either
the console or AUTOEXEC would have a value of 3 (2**0 +
2**1).
On a read, a bit will be set for each place the
parameter can be set from. On a write, bits should be
set to specify where the set command should be placed.
If nwSetParamValue is written without nwSetParam also
being set in the same PDU, the parameter will be set as
if at the console; unless it is a parameter which can
only be set in STARTUP.NCF in which case an error will
be returned"
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from nwserver.mib

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.