---
oid: "1.3.6.1.4.1.2.6.147.2.1.2.2.1.1.4"
short-description: "hubGrpStatsMon100TotalOctets OBJECT-TYPE"
last-modified: "2025-11-27"
parent-oid: "1.3.6.1.4.1.2.6.147.2.1.2.2.1.1"
---

## OID: `1.3.6.1.4.1.2.6.147.2.1.2.2.1.1.4`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2 ibmProd(6) ibm8245(147) fastEnetHubMgmt(2) hub110(1) hubNetMonPackage(2) hubGrpStatsMon100(2) hubGrpStatsMon100Table(1) hubGrpStatsMon100Entry(1) hubGrpStatsMon100TotalOctets(4)}
```

### Description

```asn1
hubGrpStatsMon100TotalOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets contained in the valid
frames that have been received on all of the 100Mbps
ports in this group. If an implementation can not
obtain a count of octets as seen by the repeater itself,
this counter may be the summation of the
values of the rptrMonitorPortReadableOctets
counters for all of the 100Mbps ports in the group.
This statistic provides an indicator of the total
data transferred. The approximate minimum time
for rollover of this counter in a 100Mb/s repeater
is 5.8 minutes divided by the number of 100Mbps ports in
the group.
For 100Mb/s repeaters processing traffic at a
maximum rate, this counter can roll over in less
than 6 minutes divided by the number of ports in
the repeater. Since that amount of time could
be less than a management station's poll cycle
time, in order to avoid a loss of information a
management station is advised to also poll the
hubGrpStatsMon100Upper32TotalOctets object."
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.