---
oid: "1.3.6.1.4.1.2.6.147.2.1.1.3.2.1.6"
short-description: "hubRdntLinkActiveLink OBJECT-TYPE"
last-modified: "2025-11-27"
parent-oid: "1.3.6.1.4.1.2.6.147.2.1.1.3.2.1"
---

## OID: `1.3.6.1.4.1.2.6.147.2.1.1.3.2.1.6`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2 ibmProd(6) ibm8245(147) fastEnetHubMgmt(2) hub110(1) hubCfgPackage(1) hubRedundantLinkCfg(3) hubRedundantLinkTable(2) hubRedundantLinkEntry(1) hubRdntLinkActiveLink(6)}
```

### Description

```asn1
hubRdntLinkActiveLink OBJECT-TYPE
SYNTAX INTEGER {primary-link(1), secondary-link(2), both-link-failed(3)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates the active link for a given redundant link pair.
When a redundant link pair has been configured and enabled,
this object will return primary-link(1) to indicate that
primary port is enabled. The secondary port shall be disabled
to prevent looping.
If the connection to the primary port is broken, the secondary port
will be enabled to keep the device connected. This object
will return secondary-link(2) and a trap will be sent to indicate
the port switch over event.
If the connection of both primary port and the secondary port are
broken, this object will be set to both-link-failed(3).
A trap will be sent to indicate the port switch over event.
Note: The user has to set return-to-primary-link(5) to object
hubRdntLinkStatus to reset the backup function
when the connection to the primary port is recovered."
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.