---
oid: "1.3.6.1.4.1.1991.3.1.2.2.2.1"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 1991 experimental(3) pwe3(1) pwStdMIB(2) pwConformance(2) pwCompliances(2) pwModuleFullCompliance(1)}"
description: "pwModuleFullCompliance MODULE-COMPLIANCE"
classification: "MIB object for network management"
last-modified: "2024-03-05"
---

## OID : `1.3.6.1.4.1.1991.3.1.2.2.2.1`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 1991 experimental(3) pwe3(1) pwStdMIB(2) pwConformance(2) pwCompliances(2) pwModuleFullCompliance(1)}
```

### Description

```asn1
pwModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that provide full
support for PW MIB Module. Such devices can
then be monitored and configured using
this MIB module."
MODULE -- this module
MANDATORY-GROUPS {pwBasicGroup, pwPerformanceGeneralGroup, pwPeformanceTotalGroup}
GROUP pwNotificationGroup
DESCRIPTION
"This group is only mandatory for implementations
which can efficiently implement the notifications
contained in this group."
GROUP pwPwIdGroup
DESCRIPTION
"This group is only mandatory for implementations
that support the PW ID FEC."
GROUP pwGeneralizedFecGroup
DESCRIPTION
"This group is only mandatory for implementations
that support the generalized PW FEC."
GROUP pwFcsGroup
DESCRIPTION
"This group is only mandatory for implementations
that support FCS retention."
GROUP pwFragGroup
DESCRIPTION
"This group is only mandatory for implementations
that support PW fragmentation."
GROUP pwPwStatusGroup
DESCRIPTION
"This group is only mandatory for implementations
that support PW status notification."
GROUP pwGetNextGroup
DESCRIPTION
"This group is only mandatory for implementations
where the pwIndex may be any arbitrary value
and the EMS would require retrieval of the next
free index."
GROUP pwPriorityGroup
DESCRIPTION
"This group is only mandatory for implementations
that support the controlling the PW setup and
holding priority."
GROUP pwAttachmentGroup
DESCRIPTION
"This group is only mandatory for implementations
that support attachment of two PWs (PW stitching)."
GROUP pwPerformanceIntervalGeneralGroup
DESCRIPTION
"This group is only mandatory for implementations
that support PW performance gathering in 15
minute intervals."
GROUP pwPeformanceIntervalGroup
DESCRIPTION
"This group is only mandatory for implementations
that support PW performance gathering in 15
minute intervals."
GROUP pwHCPeformanceIntervalGroup
DESCRIPTION
"This group is only mandatory for implementations
where at least one of the interval performance
counters wraps around too quickly based on the
criteria specified in RFC 2863 for high-capacity
counters."
GROUP pwMappingTablesGroup
DESCRIPTION
"This group is only mandatory for implementations
that support reverse mapping of PW indexes to
the pwIndex and the peer mapping table."
GROUP pwSignalingGroup
DESCRIPTION
"This group is only mandatory for implementations
that support the PW signaling."
GROUP pwNotificationControlGroup
DESCRIPTION
"This group is only mandatory for implementations
that support the PW notifications."
OBJECT pwAdminStatus
SYNTAX INTEGER {up(1), down(2)}
DESCRIPTION
"The support of the value testing(3) is not
required."
OBJECT pwOperStatus
SYNTAX INTEGER {up(1), down(2), notPresent(5), lowerLayerDown(6)}
DESCRIPTION
"The support of the values testing(3) and dormant(4)
is not required."
OBJECT pwRowStatus
SYNTAX INTEGER {active(1), notInService(2), notReady(3)}
WRITE-SYNTAX INTEGER {active(1), notInService(2), createAndGo(4), destroy(6)}
DESCRIPTION
"Support for createAndWait is not required. Support
of notReady is not required for implementations
that do not support signaling, or if it is
guaranteed that the conceptual row has all the
required information to create the PW when the
row has been created by the agent or written by
the operator."
OBJECT pwPeerAddrType
SYNTAX INTEGER {unknown(0), ipv4(1)}
MIN-ACCESS read-only
DESCRIPTION
"Only unknown(0) and ipv4(1) is required.
Implementation that support only IPv4 MAY support
read-only access."
OBJECT pwPeerAddr
SYNTAX InetAddress (SIZE(0|4))
DESCRIPTION
"An implementation is only required to support
0, 4 address sizes."
OBJECT pwStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pwNotifRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
