---
oid: "1.3.6.1.4.1.164.6.2.15.1.1.2"
short-description: "physicalConnector OBJECT-TYPE"
last-modified: "2024-05-03"
parent-oid: "1.3.6.1.4.1.164.6.2.15.1.1"
---

## OID: `1.3.6.1.4.1.164.6.2.15.1.1.2`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 164 radGen(6) agnt(2) systemPort(15) physicalConnectorTable(1) physicalConnectorEntry(1) physicalConnector(2)}
```

### Description

```asn1
physicalConnector OBJECT-TYPE
SYNTAX INTEGER {other(1), v35(2), -- 34 pin female
rs530(3), -- DB25
x21(4), -- DB15
bnc(5), utp(6), -- RJ45
aui(7), rs422(8), -- DB25
crossUtp(9), -- RJ45
rj45(10), v24(11), -- DB25
g703(12), -- TB5
termBlock3AndRj45(13), terminalBlock3(14), terminalBlock5(15), terminalBlock7(16), db25(17), db15(18), rj45ethernet(19), termBlock5AndRj45(20), db9(21), g703E1(22), -- BNC-RJ45-BNC
g703E1-LTU(23), -- BNC-RJ45-BNC
sc(24), -- sc optical
st(25), -- st optical
stl(26), fc(27), -- fc optical
tb5w(28), -- Term-Block-5-Wire (for HCD)
termBlock6AndRj45(29), ethBnc(30), scsi26(31), -- SCSI with 26 pins
eth4381(32), -- RJ45 with two embeded LEDs
twoBnc(33), -- Two BNC
scsi50(34), -- SCSI with 50 pins
twoMiniBnc(35), -- Two mini BNC
sf1(36), -- sf1=single fiber optical
terminalBlock4(37), sf2(38), -- sf2=single fiber optical
db25Balanced(39), -- DB25 Balanced
v36(40), block4W(41), -- like in WR connector for Modems
iripRj45(42), irEthQRj45(43), iripBnc(44), rs530WA(45), -- rs530/IR that solves a wander problem for SDH network
v35WA(46), -- v35/IR that solves a wander problem for SDH network
irEthQBnc(47), v35Db25(48), -- V.35 with connector DB25
rj11(49), -- Used for FXS & FXO
mtrj(50), -- optical
lc(51), -- optical
terminalBlock2(52), irEth10s100(53), -- IR-ETH 10/100
scsi68(54), -- SCSI 68 pins
sf3(55), -- sf3=single fiber of sc optical
fcLH(56), -- fc Long Haul
telco50(57), -- TELCO 50
telco64(58), -- TELCO 64
irEthQN(59), terminalBlock6(60), scLH(61), -- sc Long Haul
stLH(62), -- st Long Haul
lcLH(63), -- lc Long Haul
sfpIn(64), -- SFP module is installed (In container)
sfpOut(65), -- SFP module is not installed (Out of container)
db44(66), -- DB44 (High Density D-type)
db62(67), -- DB62 (High Density D-type)
v24Db9(68), -- V.24 with connector DB9
scsi40(69), -- SCSI 40 pins
sf1NineRow(70), -- sf1 9-row
sf2NineRow(71), -- sf2 9-row
sf3NineRow(72), -- sf3 9-row
smartSerial26(73), -- QDC1113L (Cisco)
miniUsb5(74), db26(75), -- DB26 (High Density D-Type)
comboUtpSfpIn(76), -- UTP+SFP combo, SFP module is installed
comboUtpSfpOut(77), -- UTP+SFP combo, SFP module is not installed
hiDensity160Pin(78), -- CISCO High Density Connector with 160 Pins
xfpIn(79), -- XFP module is installed (In container)
xfpOut(80), -- XFP module is not installed (Out of container)
ssfpIn(81), -- Smart SFP is installed
ssfpOut(82), -- Smart SFP is not plugged-in
comboUtpSsfpIn(83), -- Smart SFP is plugged-in on combo port
comboUtpSsfpOut(84), -- Smart SFP is not plugged-in on combo port
scsi68DS(85), -- Double Signaling SCSI 68 pins
miniBnc(86), -- mini BNC Connector
sMA(87), -- GPS Connector
rj45Shdsl8w(88), -- rj45Shdsl8w
miniBncAndRj45(89), -- Mini BNC & RJ45 Connectors (used for 1pps or EXT CLK)
sfpPlusIn(90), -- SFP+ module is installed (In container)
sfpPlusOut(91), -- SFP+ module is not installed (Out of container)
none(255)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
```

**Classification:** MIB object for network management

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.