--- oid: "1.3.6.1.4.1.1206.4.2.4.1.1" short-description: "sensorSystemReset OBJECT-TYPE" last-modified: "2025-11-26" parent-oid: "1.3.6.1.4.1.1206.4.2.4.1" --- ## OID: `1.3.6.1.4.1.1206.4.2.4.1.1` ```asn1 {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 1206 transportation(4) devices(2) tss(4) tssSystemSetup(1) 1} ``` ### Description ```asn1 sensorSystemReset OBJECT-TYPE SYNTAX INTEGER {restart(1), reinitialize(2), shortDiagnostics(3), fullDiagnostics(4), commandComplete(255)} ACCESS read-write STATUS mandatory DESCRIPTION " This object commands the entire sensor system to reset. Reading a value other than 255 indicates the presence of a pending or executing command. A write to this object is not allowed unless the current value is 255. The reset commands are described as follows: Value Meaning 1 Restart command shall cause the unit to enter restart state and go through a complete shut-down and start-up process; 2 Reinitialization commands hall cause the unit to flush all volatile memory and reinitialize all settings to their default values; 3 Short diagnostics command shall cause the unit to go through an abbreviated vendor specific diagnostic routine which may be the same as full diagnostics for some vendors; 4 Full diagnostics shall cause the unit to go through a complete vendor specific diagnostic routine which may be the same as short diagnostics for some vendors; 5\..128 Reserved for future use; 255 Command complete shall be the default-state for which writing causes no action. 1.3.6.1.4.1.1206.4.2.4.1.1" ``` **Classification:** MIB object for network management ### Child OIDs No child OID ### Terms of Use [Terms of use](https://oid-base.com/disclaimer.htm.md) **Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.