---
oid: "1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 11 nm(2) system(3) net-peripheral(9) netdm(4) dm(2) device(1) source-subsystem(2) scanner(2) status-scanner(2) scan-calibration-error(6)}"
description: "scan-calibration-error OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2024-05-30"
---

## OID : `1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 11 nm(2) system(3) net-peripheral(9) netdm(4) dm(2) device(1) source-subsystem(2) scanner(2) status-scanner(2) scan-calibration-error(6)}
```

### Description

```asn1
scan-calibration-error OBJECT-TYPE
SYNTAX INTEGER {eNoError(1), eUnknownCalibrationError(2), eScannerFeederEmpty(3), eLowMemory(4), eWriteFailed(5), eScannerBusy(6), eADFMispick(7), eADFJam(8), eUncorrectablePixels(9)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error status of the most recent calibration session.
eNoError(1) - The calibation was successful.
eUnknownCalibrationError(2) - An unknown error
occurred.
eScannerFeederEmpty(3) - The feeder contained nothing to
scan.
eLowMemory(4) - Insufficient memory available to
complete the calibration.
eWriteFailed(5) - Write to NVRAM failure.
eScannerBusy(6) - Scanner is busy.
Detailed information about the cause and remedy for each
error should be documented in the device POS.
Additional information:
This object was originally defined for use on
HP LaserJet 1100. We are proposing the new enums number 7-9.
Note: Option 9 would only be set during a factory calibration
to indicate that at least one pixel was not correctable by
the digital calibration factors."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
