---
oid: "1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 11 nm(2) system(3) net-peripheral(9) netdm(4) dm(2) device(1) source-subsystem(2) scanner(2) status-scanner(2) scan-calibration-download(5)}"
description: "scan-calibration-download OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2024-05-30"
---

## OID : `1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 11 nm(2) system(3) net-peripheral(9) netdm(4) dm(2) device(1) source-subsystem(2) scanner(2) status-scanner(2) scan-calibration-download(5)}
```

### Description

```asn1
scan-calibration-download OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Returns or changes the state of the calibration
operation.
cScanCalibrationIdle - indicates that calibration is not
in progress.
cScanCalibrationStart - This state is set by host to
request calibration initiation. Device should not set to
this state.
cScanCalibrationActive - Indicates device is in
calibration mode. Device sets cScanCalibrationActive to
signal calibration is in process.
cScanCalibrationAborted - Set by device to indicate
calibration was prematurely terminated. Set by host when
a calibration error occurs.
cScanCalibrationSendDataRequest - Set by host when host
wants to send data to the device.
cScanCalibrationSendDataRequestOK - Set by the device to
tell the host that the device is ready to accept data.
cScanCalibrationSendDataRequestDone -Set by the device
to indicate the data was received by the device.
cScanCalibrationRequestScanBuffer - Set by the host to
request a buffer from the device.
cScanCalibrationDone - Set by the host to inform the
device calibration is complete.
The sequence of bits being set and the restrictions for
setting bits should be documented in the device POS.
Additional information:
This object was originally defined for
use on HP LaserJet 1100. HP Laserjet 3200 we will not be using
values 3-6. These are no longer applicable since
the calibration is completely contained within firmware."
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
