---
oid: "1.3.6.1.4.1.11.2.14.11.1.11.1.2"
asn1-notation: "{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 11 nm(2) icf(14) hpicfObjects(11) hpicfCommon(1) hpicfHighAvailability(11) hpicfHAConfigObjects(1) hpicfHAContinuousFwdingTime(2)}"
description: "hpicfHAContinuousFwdingTime OBJECT-TYPE"
classification: "MIB object for network management"
last-modified: "2023-02-21"
---

## OID : `1.3.6.1.4.1.11.2.14.11.1.11.1.2`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 11 nm(2) icf(14) hpicfObjects(11) hpicfCommon(1) hpicfHighAvailability(11) hpicfHAConfigObjects(1) hpicfHAContinuousFwdingTime(2)}
```

### Description

```asn1
hpicfHAContinuousFwdingTime OBJECT-TYPE
SYNTAX Unsigned32 -- (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a configurable timer. After the failover, on the new AMM,
the route and neighbor table entries are marked as stale in the FIB.
As routing protocols begin to re-add routes, this stale flag
will be reset. When this timer expires, all route and neighbor
table entries still marked stale [not yet re-added] will be
removed. A value of 0 means that no layer 3 hitless behavior is desired,
and in this configuration, upon failover all FIB entries are
flushed and corresponding hardware entries are removed.
A default value of 5 minutes is chosen with the assumption
that the routing protocols can finish re-adding the routes to
the equivalent state within this time."
DEFVAL {300}
```

**Classification**: MIB object for network management

### Child OIDs

No child OID

### Terms of Use
[Terms of use](https://oid-base.com/disclaimer.htm.md)
