---
oid: "1.3.6.1.2.1.22.1.3.1.1.3"
short-description: "rptrPortAdminStatus OBJECT-TYPE"
last-modified: "2020-06-23"
parent-oid: "1.3.6.1.2.1.22.1.3.1.1"
---

## OID: `1.3.6.1.2.1.22.1.3.1.1.3`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snmpDot3RptrMgt(22) rptrBasicPackage(1) rptrPortInfo(3) rptrPortTable(1) rptrPortEntry(1) rptrPortAdminStatus(3)}
```

### Description

```asn1
rptrPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to disabled(2) disables the
port. A disabled port neither transmits nor
receives. Once disabled, a port must be
explicitly enabled to restore operation. A port
which is disabled when power is lost or when a
reset is exerted shall remain disabled when normal
operation resumes.
The admin status takes precedence over auto-
partition and functionally operates between the
auto-partition mechanism and the AUI/PMA.
Setting this object to enabled(1) enables the port
and exerts a BEGIN on the port's auto-partition
state machine.
(In effect, when a port is disabled, the value of
rptrPortAutoPartitionState for that port is frozen
until the port is next enabled. When the port
becomes enabled, the rptrPortAutoPartitionState
becomes notAutoPartitioned(1), regardless of its
pre-disabling state.)"
REFERENCE
"[IEEE 802.3 Mgt], 30.4.3.1.2, aPortAdminState
and 30.4.3.2.1, acPortAdminControl."
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from IETF [RFC 2108](https://www.rfc-editor.org/rfc/rfc2108.html).

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.