---
oid: "1.3.6.1.2.1.186.1.1.1.1"
short-description: "pwTDMRate OBJECT-TYPE"
last-modified: "2019-12-19"
parent-oid: "1.3.6.1.2.1.186.1.1.1"
---

## OID: `1.3.6.1.2.1.186.1.1.1.1`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) pwTDMMIB(186) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
```

### Description

```asn1
pwTDMRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The parameter represents the bit-rate of the TDM service
in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT].
It complements the definition of pwType used in
PW-STD-MIB.
For structure-agnostic mode, the following should be used:
a) (Structure-Agnostic TDM over Packet) Satop E1 - 32
b) Satop T1 emulation:
i) MUST be set to 24 in the basic emulation mode
ii) MUST be set to 25 for the 'Octet-aligned T1'
emulation mode
c) Satop E3 - 535
d) Satop T3 - 699
For all kinds of structure-aware emulation, this parameter
MUST be set to N where N is the number of DS0 channels
in the corresponding attachment circuit."
REFERENCE
"TDMCP-EXT"
DEFVAL { 32 }
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from IETF [RFC 5604](https://www.rfc-editor.org/rfc/rfc5604.html).

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
