---
oid: "1.3.6.1.2.1.181.1.1.1.1"
short-description: "pwMplsMplsType OBJECT-TYPE"
last-modified: "2022-02-11"
parent-oid: "1.3.6.1.2.1.181.1.1.1"
---

## OID: `1.3.6.1.2.1.181.1.1.1.1`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) pwMplsStdMIB(181) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
```

### Description

```asn1
pwMplsMplsType OBJECT-TYPE
SYNTAX BITS {mplsTe(0), mplsNonTe(1), pwOnly(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set by the operator to indicate the outer
tunnel types, if existing. mplsTe(0) is used if the outer
tunnel is set up by MPLS-TE, and mplsNonTe(1) is used if the
outer tunnel is set up by LDP or manually. A combination of
mplsTe(0) and mplsNonTe(1) MAY exist.
pwOnly(2) is used if there is no outer tunnel label, i.e.,
in static provisioning without an MPLS tunnel. pwOnly(2)
cannot be combined with mplsNonTe(1) or mplsTe(0).
An implementation that can identify automatically that the
peer node is directly connected MAY support the bit
pwOnly(2) as read-only."
DEFVAL {{mplsNonTe}}
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from IETF [RFC 5602](https://www.rfc-editor.org/rfc/rfc5602.html).

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.