---
oid: "1.3.6.1.2.1.10.251.1.5.1.2.1.5"
short-description: "xdsl2LConfProfRfiBands OBJECT-TYPE"
last-modified: "2020-09-28"
parent-oid: "1.3.6.1.2.1.10.251.1.5.1.2.1"
---

## OID: `1.3.6.1.2.1.10.251.1.5.1.2.1.5`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfTable(2) xdsl2LineConfProfEntry(1) xdsl2LConfProfRfiBands(5)}
```

### Description

```asn1
xdsl2LConfProfRfiBands OBJECT-TYPE
SYNTAX Xdsl2RfiBands
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For Recommendation ITU-T G.992.5, this configuration
parameter defines
the subset of downstream PSD mask breakpoints, as specified in
xdsl2LConfProfPsdMaskDs (PSDMASKds), that shall be used to notch
an RFI band. This subset consists of pairs of consecutive
subcarrier indices belonging to breakpoints: [ti; ti + 1],
corresponding to the low level of the notch.
The specific interpolation around these points is defined in the
relevant Recommendations (e.g., Recommendation ITU-T G.992.5).
The CO-MIB shall define the RFI notches using breakpoints in
xdsl2LConfProfPsdMaskDs (PSDMASKds) as specified in the relevant
Recommendations (e.g., Recommendation ITU-T G.992.5).
For Recommendation ITU-T G.993.2, this configuration parameter
defines the bands where the PSD shall be reduced as
specified in #7.2.1.2/G.993.2. Each band shall be represented
by a start and stop subcarrier indices with a subcarrier
spacing of 4.3125 kHz. Up to 16 bands may be specified.
This parameter defines the RFI bands for both the upstream
and downstream directions."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.10 (RFIBANDS)"
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from IETF [RFC 5650](https://www.rfc-editor.org/rfc/rfc5650.html).

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
