---
oid: "1.3.6.1.2.1.10.251.1.5.1.1.1.8"
short-description: "xdsl2LConfTempChan2RaRatioUs OBJECT-TYPE"
last-modified: "2020-04-22"
parent-oid: "1.3.6.1.2.1.10.251.1.5.1.1.1"
---

## OID: `1.3.6.1.2.1.10.251.1.5.1.1.1.8`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfTemplateTable(1) xdsl2LineConfTemplateEntry(1) xdsl2LConfTempChan2RaRatioUs(8)}
```

### Description

```asn1
xdsl2LConfTempChan2RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #2 when performing
rate adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels.
Also, the 100 - xdsl2LConfTempChan2RaRatioUs is the ratio of
excess data rate to be assigned to all other bearer channels on
Upstream direction. The sum of rate adaptation ratios over all
bearers on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from IETF [RFC 5650](https://www.rfc-editor.org/rfc/rfc5650.html).

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
