---
oid: "1.3.6.1.2.1.10.251.1.5.1.1.1.13"
short-description: "xdsl2LConfTempChan4RaRatioDs OBJECT-TYPE"
last-modified: "2020-04-22"
parent-oid: "1.3.6.1.2.1.10.251.1.5.1.1.1"
---

## OID: `1.3.6.1.2.1.10.251.1.5.1.1.1.13`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfTemplateTable(1) xdsl2LineConfTemplateEntry(1) xdsl2LConfTempChan4RaRatioDs(13)}
```

### Description

```asn1
xdsl2LConfTempChan4RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in percent) that should be
taken into account for the bearer channel #4 when performing rate
adaptation on Downstream. The ratio refers to the available data
rate in excess of the Minimum Data Rate, summed over all bearer
channels.
Also, the 100 - xdsl2LConfTempChan4RaRatioDs is the ratio of
excess data rate to be assigned to all other bearer channels.
The sum of rate adaptation ratios over all bearers on the same
direction shall sum to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4
(Rate adaptation ratio)"
DEFVAL { 0 }
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from IETF [RFC 5650](https://www.rfc-editor.org/rfc/rfc5650.html).

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.
