---
oid: "1.3.6.1.2.1.10.200.2.1.1"
short-description: "teLinkModuleFullCompliance MODULE-COMPLIANCE"
last-modified: "2020-04-16"
parent-oid: "1.3.6.1.2.1.10.200.2.1"
---

## OID: `1.3.6.1.2.1.10.200.2.1.1`

```asn1
{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) teLinkStdMIB(200) teLinkConformance(2) teLinkCompliances(1) teLinkModuleFullCompliance(1)}
```

### Description

```asn1
teLinkModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support read-create
so that both configuration and monitoring of TE links can
be accomplished via this MIB module."
MODULE -- this module
MANDATORY-GROUPS { teLinkGroup,
teLinkBandwidthGroup,
componentLinkBandwidthGroup }
GROUP teLinkSrlgGroup
DESCRIPTION
"This group is mandatory for GMPLS enabled devices."
GROUP teLinkPscGroup
DESCRIPTION
"This group is mandatory for devices that support the
packet switching capability."
GROUP teLinkTdmGroup
DESCRIPTION
"This group is mandatory for devices that support the TDM
switching capability."
\-- teLinkTable
OBJECT teLinkAddressType
SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION
"Only ipv4(1) and ipv6(2) address types need to be
supported for numbered links. For unnumbered links, the
unknown(0) address type needs to be supported."
OBJECT teLinkLocalIpAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION
"Size of TE link IP address depends on type of TE link.
TE link IP address size is zero if the link is unnumbered,
four if the link IP address is IPv4, and sixteen if the
link IP address is IPv6."
OBJECT teLinkRemoteIpAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION
"Size of TE link IP address depends on type of TE link.
TE link IP address size is zero if the link is unnumbered,
four if the link IP address is IPv4, and sixteen if the
link IP address is IPv6."
OBJECT teLinkRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
\-- teLinkDescriptorTable
OBJECT teLinkDescrRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
\-- teLinkSrlgTable
OBJECT teLinkSrlgRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
\-- teLinkBandwidthTable
OBJECT teLinkBandwidthRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
\-- componentLinkTable
OBJECT componentLinkRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
\-- componentLinkDescriptorTable
OBJECT componentLinkDescrRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
\-- componentLinkBandwidthTable
OBJECT componentLinkBandwidthRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6) }
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
```

**Classification:** MIB object for network management

### Supplementary information

Automatically extracted from IETF [RFC 4220](https://www.rfc-editor.org/rfc/rfc4220.html).

### Child OIDs

No child OID

### Terms of Use

[Terms of use](https://oid-base.com/disclaimer.htm.md)

**Note to implementers:**: The OID repository is constantly updated but does not necessarily store the latest (or most accurate) version of this formal description. For an implementation, it is recommended to search the web for a more recent description. If this is the case, please update the above description.